These are employer-provided training, not provincial tickets. WorkSafeBC sets the rules; your employer must make sure you are trained for the actual equipment and hazards.
| Detail | Source | |
|---|---|---|
| Summary | Employers must give workers WHMIS education and workplace-specific training on hazardous products, and review the program at least annually (OHS Regulation ss.5.5-5.7) | source |
| Issuing body · Url | Official page | source |
| Credential | No provincial WHMIS certificate or licence; WorkSafeBC does not offer WHMIS training or certification. Generic course certificates do not replace workplace-specific training | source |
| Course sources | WorkSafeBC WHMIS page points to CCOHS and ohstrainingbc.com for courses | source |
Confined space entry is governed by OHS Regulation Part 9. There is no provincial ticket; a qualified person prepares the hazard assessment and procedures.
| Detail | Source | |
|---|---|---|
| Summary | Employers with workers entering confined spaces need a written entry program (s.9.5), a trained program administrator (s.9.6) and trained supervisor (s.9.7); everyone with duties, including standby and rescue workers, must be trained in the hazards and procedures (s.9.8) | source |
| Issuing body · Url | Official page | source |
| Credential | No provincial confined-space ticket. Hazard assessment and procedures must be prepared by a qualified person (s.9.11): e.g. CIH, ROH, CSP, CRSP or P.Eng. with confined-space experience, or another combination acceptable to the Board | source |
| Jobs requiring it | Entrants, attendants/standby, rescue workers, supervisors and program administrators | source |
| Guidelines | WorkSafeBC Guidelines Part 9 | source |
Operators need training on the specific type of lift, to CSA B354.8.
| Detail | Source | |
|---|---|---|
| Summary | Elevating work platforms must meet and be used per the applicable CSA/ANSI standard (s.13.2(1)); operator training follows those standards (e.g. CSA B354.8:17) | source |
| Issuing body · Url | Official page | source |
| Credential | Proof of training is type-specific (e.g. scissor lift vs boom); CSA requires the operator to carry proof | source |
| Jobs requiring it | Workers operating scissor lifts or boom lifts | source |
| Fall arrest | Fall arrest required on elevating work platforms; scissor lifts on firm level ground with guardrails in place are exempt (s.13.33) | source |
| Inspection | Vehicle-mounted and self-propelled boom platforms need inspection every 12 months (s.13.23) | source |
An Energy Safety Canada one-day course, common in oil and gas. It is not named in BC regulation.
| Detail | Source | |
|---|---|---|
| Summary | 1-day classroom course on identifying and detecting hydrogen sulphide, hazard control, respiratory protection and initial response; theory plus practical | source |
| Issuing body · Url | Official page | source |
| Credential | Certificate of completion valid 3 years; exam pass mark 70%; full attendance mandatory | source |
| Renewal | Blended renewal (online theory exam + in-person skills assessment at an ESC Authorized Training Provider) for holders of a valid, unexpired certificate; new certificate valid 3 years | source |
| Course length | 1 day; classes begin 8:00 a.m. and may run past 4:30 p.m. MT | source |
No. WorkSafeBC does not issue WHMIS certificates. Your employer must give workplace-specific training; a generic online certificate does not replace it.
BC regulation does not name H2S Alive. Many oil and gas employers ask for it. It is valid 3 years.
No. Proof of training is type-specific.
This page relies on the official pages below. Rules, fees and processes change, so check the authority before you apply or spend money.
Links checked November 1, 2026. Found an error or a broken link? Report it.